Choice 355NG Dressed – Lowboy, 53' x 102"
Choice 355NG Dressed Lowboy with overall length 53' and width 102", capacity 110,000lbs.
Key Specs
- Configuration: 3 axle 55-ton non-ground bearing
- Capacity: 110,000lbs
- Overall Length: 53'
- Overall Width: 102"
- Deck Length: 26'
- Loaded Deck Height: 22" w/ 6" ground clearance; adjustable
Tub Construction
- Main Deck: 4-beam construction, fully cambered fabricated beams, 100KSI hightensile T1 steel; expanded metal tool tray at front of main deck
- Decking: Raised apitong flooring; center deck open standard
- Rear Deck: Bolster style, open wheels standard
- Bucketwell: Recessed bucketwell cutout at rear of main deck
- Boomwell: Recessed boomwell cutout over axles and bumper
- Ramps: Front loading ramps, folding style with traction cleats for loading tracked equipment
- Outriggers: Heavy-duty pull-out outriggers at beginning of load bed, removeable 12" swing-type outriggers evenly spaced the entire length of main deck
- Lashing Rings: 1" forged bent d-rings, evenly spaced the entire length of main deck
- Flag Holder Slots: One pair located at front of load bed and one pair located on rear bumper
Hydraulics & Control
- Gooseneck Type: Low profile scraper gooseneck, arched, hydraulic detachable, non-ground bearing, air-actuated locking pin
- Hyd. Lift Cylinders: Two (2); control valve located on driver side of gooseneck
- Hydraulic Power: Runs off wet kit (5 TO 12 GPM hyd. requirement)
- Adj. Ride Heights: Yes; 5 positions
- Hyd. Neck Support: Yes
Axles & Suspension
- Suspension: Air-ride; 25,000# capacity; automatic ride height controls; manual override; raise and lower valve
- Axles: 25,000# nominal axles; oil-lubricated hubs; 77.5" track width; Axle Spacing: 55"
- Lift Axle: Equipped on third axle standard
- Brakes: 16" x 7" drum brakes, 4S2M ABS-equipped, automatic slack adjusters, 30-30 chambers on all axles
- Flip Axle: Reinforced sub-frame; connections for flip axle included
Wheels & Tires
- Wheels: Steel disc, hub-piloted type, white
- Tires: 255/70R22.5 Load Range H 16-ply steel-belted radial
- Wheels outer: 8.25 x 22.5 10-Hole pilot mount aluminum polished wheels
Electrical & Lighting
- Electrical: D.O.T.-approved, sealed 12 electrical and lighting system
- Lighting: LED lights; 3 tail lights per side; mid turn
Additional Features
- Paint: Sandblasted, painted with epoxy primer and polyurethane topcoat, black
- Options: 13 HP Honda unit, base of neck, dual hydraulics