XL SPECIALIZED 110HDGS18

XL 110 LOW-PROFILE HDG 18" DECK HEIGHT  
 
CAPACITY 
Capacity: 110,000 LB Distributed 
Concentrated: 110,000 LB in 12’ 
Weight +/- 3%: 22,475 LB 
 
OVERALL LENGTH & WIDTH 
Overall Length: 53’ 
Overall Width: 102” 
 
GOOSENECK 
Neck Style: Low-Profile Scraper 
13' Long 
Kingpin Setting: 16"    42" 
Swing Clearance: 110"     84" 
5th Wheel Height: 51" w/ 5 Variable Ride Height Positions 
Hydraulics: 13-HP Honda SCU, Dual Hydraulics, w/ Steel Engine Cover, Brackets for Power Unit, Work Light on Neck, Registration Holder 
 
MAIN DECK 
26’ long 
Loaded Deck Height: 18" w/ 6" Ground Clearance  
1 3"/4" Apitong Decking, Raised – Center Open  
Crossmember: 8" & 4" Stubbed Jr I-Beam 12" Alternating Centers 
Beams: (4) 12" Fab I-Beams  
D-rings: (7) Bent D-Rings Per Side  
Swing Out Outriggers – 24" Centers – H.D. Flat Back Front  
Chain Drops: 24" Centers – Outside Beams 
 
REAR DECK 
Length: 14' with 32 Degree Rear Transition  
41" Loaded Deck Height  
Axles: (3) 25,000 LBS. Nominal (5/8" Wall) 
Suspension: Hendrickson/25,000 Capacity/Air Ride  
Axle Spacing: 54 ½" 
Abs: N/A Spring Brakes on (1) Axle  
Tires: 275/70R/22.5 (J) 
Wheels: 8.25 x 22.5 10-Hole Pilot Mount, Polished Aluminum Outside, Steel Inside Disc 
Brakes: 16 ½" x 7" 
Drums: Outboard 
Electrical: 12V Sealed Grote System with (3) Tail Light Aluminum Package, 4" Amber Strobe To Be Used As 3rd Tail Light, Open Wheels Bolster Style 
Decking: Open Wheels Bolster Style, Covered Boom Trough, Bolsters Dropped Down 4" Down 
(2) Flat D-Rings At Rear On Main Beams 
(2) Chain Drops Per Bolster  
(2) Stake Pockets At Rear  
Paint: Black  
 
ADDITIONAL 
Manual Ride Height Control  
Prep For Single Axle Booster 
Raise And Lower Valve 
Bucket Well At Rear Of Main Deck With Plate On Bottom With (4) Flat D-Rings 
Toolbox At Front Of Main Deck With (4) Flat D-Rings 
(2) Pair Of Flag Holders 
Front Ramp Upper Flange Reinforcement 
Air Lift Axle On 3rd Axle 
Liquid Filled Air Gauge  
31" Front Flip Ramps