2024 LOAD KING 503/554 SS SF

LOAD KING 503/554SS SF   
-SIGNATURE SERIES – 55 TON HYDRAULIC DETACHABLE GOODENECK REINFORCED FOR A FUTURE STINGER-FLIP 
 
GENERAL 

HYDRAULIC NON-GROUND BEARING HIGH RELIEF SCRAPER NECK  
LED WORK LIGHTS REAR FACING ON GOOSENECK  
12'-9" GOOSENECK WITH 110" & 86" SWING 
52" 5TH WHEEL HEIGHT  
ADJUSTABLE 5 POSITION RIDE HEIGHT RATCHET 
HIGH CLEARANCE FRAME RECESS WITH HYDRAULIC FRAME LIFT SUPPORT ARM  
AIR-ACTIVATED, SELF LOCKING PIN ON GOOSENECK, POSITIVE SAFETY LOCK  
HYDRAULIC POWER FROM TRACTOR SOURCE  
BATTERY SHUT OFF FOR UNITS EQUIPED WITH PONY MOTORS  
DECK 

4 FULL DEPTH 12 IN. CAMBERED DECK BEAMS  
26 FT. DECK LENGTH – FLAT  
13 PAIR CHAIN SLOTS IN OUTER FLANGES FOR 3/8" & ½" CHAIN  
ALTERNATING 8" & 4" CROSSMEMEBERS ON 12 IN. CENTERS 
18 IN. LOADED DECK HEIGHT WITH 6" LOADED GROUND CLEARANCE  
2" APITONG (NOMINAL) IN TRACK AREA BOLTED AT ALL BOARD ENDS  
OPEN IN CENTER OF DECK  
OUTRIGGERS: 13 PAIR SWING OUT  
REMOVABLE  
WIDE LOAD PACKAGE – GUSSETS BEHIND EACH OUTIGGER  
BOXED FRONT APPROACH & UPPER FLANGE REINFORCEMENT  
BENT D-RINGS: 6 PER SIDE, MOUNTED TO REINFORCEMENT  
RECESSED LAST 8 FT. OF DECK WITH PIERCED STEEL PLATE  
PIERCED STEEL TOOL BOX – 60" AT FRONT  
30" FRONT FLIP RAMPS – BRIDGE STYLE  
42 DEGREE RADIUS TO SUBFRAME  
RAMP TO SUBFRAME  
SUBFRAME 

FRAME REINFORCEMENT & CONNECTIONS FOR FUTURE STINGER (4 AXLES TOTAL) 
AIR LIFT 3RD AXLE W/ MANUAL RAISE & LOWER VALVE, +3/-3 OFF LEVELING VALVE  
THREE 27,500 LB AXLES – 5" x ¾" WALL  
AXLE SPACING: 54.5" 
TWELVE YOKOHAMA RY023 255/70R22.5 H RADIUS  
ALUM/STEEL WHEELS –OUTSIDE POLISHED  
16 ½ IN. X 7 IN. DRUM BRAKES, NO ABS  
SPRING BRAKES ON 2ND AXLE  
THREE TAIL LIGHT PACKAGE WITH STROBES & BATTERY  
EXCAVATOR NOTCH PLATE & BACKHOE TRAY  
COVERED WHEEL WELLS - (3) PIECE RAISED BOLT ON STYLE  
WIDE LOAD SIGN POCKETS (NO SIGN) 
LOWERED CROSSMEMBERS IN SUBFRAME  
4 PAIR FLAT D-RINGS MOUNTED ON UPPER FLANGE  
OTHER 

GROTE LED LIGHTS & SEALED HARNESS 
MID SHIP TURN SIGNAL W/DUAL INTENSITY REAR MARKER LIGHTS  
ATTACHMENTS INCLUDED 

CONNECTIONS & REINFORCING FOR FUTURE 14' 1" STINGER  
CONNECTIONS & REINFORCING FOR FUTURE 4TH AXLE FLIP