GATE VALVE
Four Way Versa Valve: This valve is commonly used on the Ranco bottom
dumps to operate the gates. It has a manual handle function as well as a
solenoid to activate the valve via a switch in the cab for remote dump
operation.
Uses solenoid for remote operation
Has handle and push button for manual operation
Commonly used on belly dumps
1/2" NPT
Four Way Versa Valve: This valve is commonly used on the Ranco bottom dumps to operate the gates. It has a manual handle function as well as a solenoid to activate the valve via a switch in the cab for remote dump operation.
Uses solenoid for remote operation
Has handle and push button for manual operation
Commonly used on belly dumps
1/2" NPT
| Box Size | 13"X6"X5" |
|---|---|
| Country of Origin | USA |
| Finish | Matte |
| Material | Body: Brass Seals: Nitrile Coil: Epoxy molded Solenoid enclosure: Carbon steel, chromate coated |
| Package Quantity | 1 |
| Connections | ½” NPT ports ½” NPT electrical conduit, solenoid leads are not polarity dependent |
| Duty | Continuous duty coil |
| Flow C | 4 |
| Flow Rating | N/A |
| Function | 4-Way, 2 and 3 position |
| Operating Temperature Range | N/A |
| Operation | Electric Solenoid Operation, Manual Dump Operation with Handle |
| Power | 9.4 Watts |
| Pressure | 50 to 175 psi |
| Product Line | Versa Valves V Series Pneumatics |
| Replacement Parts | P-1002-02-D012, V-4512-KP-20B |
| Voltage | 12V DC |
Trouble free for years despite exposure to heat, cold, dirt and vibration. Used as a “Bottom dump” valve for hopper control on bottom dump trailers or railroad coal cars.
- Standard “Bottom Dump” operation provides both 2 position solenoid control and 3 position manual control in one valve.
- 1/2 inch NPT full flow construction.
- Bubble-tight seals provide leak free service for “creep free” hopper control.
- Withstands impact with thick walled forged brass construction. ‘i Part # * VGK-4533-20B-D012/
- Prevents contamination from dirt and sand M-450-APN-20M with Versa proven dust proof option keeping solenoid and main valve free from clogging.
- Solenoid actuators utilize ’solenoid-pilot” design, no coil burn-out due to valve hang up.
- Main spring is “air spring,” no mechanical spring to break or fail.
Use of “solenoid-pilot” and “air spring” Part # a assure positive shift every time! Quick removal of valve with plug-in solenoid option. Standard ‘0’ ring seals make repair easy!
• Economical space saving “in line” version available.
- 100% factory tested at ISO 9001 certified facility.
- Supported by established worldwide distributor network.
PARTS, SERVICE, & PROFESSIONAL INSTALLATION
1490 South 400 West Salt Lake City, UT. 84115 | www.westerntruck.com
866-416-8193
-
LINE FILTER$21.01 -
ABS VALVE ASSEMBLY$329.10 -
LIFT AXLE CONTROL VALVE$509.84