AERO - SWING ARM MOUNT BRACKET

AERO - SWING ARM MOUNT BRACKET

The aero swing arm mounting bracket is used on the front swing arm of the aero sk2 tarp system. This bracket is what holds the motor/cover assembly onto the front swing arm tube. This bracket bolts onto the front swing arm tube and secures the motor/cover assembly by the motor drive channel assembly bolting onto the top of the same bracket. Without the mounting bracket there would be nothing holding the motor/cover onto the swing arm tube. This bracket is what makes the whole front swing arm come together and work as a unit in rolling the tarp system over. 

PLEASE NOTE: This is the bracket only; mounting hardware is not included. Whenever you're changing the swing arm mounting bracket please remember that the drive unit assembly must be disassembled; and that the bracket must be installed on the drive mount channel first. Once it's mounted on the drive channel the drive unit assembly can be reassembled and then it can be installed on the front swing arm tube and put back to work.