BWS steel end-dump trailers
Start with the material and unloading site, then work through body size and gate configuration. BWS’s steel end-dump range uses a quarter-frame scissor design, with model-specific dimensions and floor specifications.
- Body construction
- Steel
- Frame design
- Quarter-frame
- Axle configurations
- 2 or 3
What to compare
Match the body to the material
The published DT model entries specify a 3/16 in. Hardox 450 floor. Confirm the complete body and floor specification against the material, impact and wear requirements.
Choose the discharge setup
BWS lists a top-hinged gate with air locks, plus alternative gate options. Discuss material flow, clearance and the intended unloading process.
Plan the unloading site
Review ground conditions, overhead clearance and operating requirements before selecting a raised-body trailer. Body volume alone does not establish working payload.
Selected model references
| Model | Overall length | Axles |
|---|---|---|
| 27DT2X | 29 ft 6 in. | 2 |
| 32DT3X | 36 ft 6 in. | 3 |
| 37DT3X | 40 ft 6 in. | 3 |
Overall lengths from BWS’s DT model table; the number in the model name is not the trailer’s overall length. All three entries list 102 in. overall width. Confirm the current body configuration and quoted capacity.
Manufacturer reference ranges and models. Confirm current specifications, ratings and options on the quoted build. Published ratings do not establish legal payload.
Current BWS inventory
Steel end-dump trailers
Looking for this configuration?
No matching BWS model is currently listed. Send your requirements and we’ll check options, availability and timing.
Before you choose
No. BWS’s model table lists the 27DT2X at 29 ft 6 in. overall. Compare explicitly labeled overall dimensions, not just the number in the model name.
No. Material density, trailer weight, structural and component ratings, and the complete combination determine the usable load. Confirm the body setup and build sheet for the intended material.
Compare another BWS family
Read the end-dump buying guide
Discuss BWS steel end-dump trailers.
Tell us what you haul and when you need it. Include equipment dimensions, weight, location and any preferred model. We’ll use those details to start the conversation.
Bring these details to your quote
- Material, density and desired load
- Loading method and expected impact
- Tailgate and discharge requirements
- Unloading-site conditions, tractor and hydraulics
Send your requirements
Your inquiry goes to Western Truck & Trailer.