Manac 4B342A200 Bottom Dump

– Manac 4B342A200 – Bottom Dump, 42'-0" x 96"

Manac 4B342A200 bottom dump with CAPACITY OF 20 CUBIC YARDS (SINGLE HOPPER) and dimensions 42'-0" length, 96" width.

Key Specs

• Model: 4B342A200
• Category: Bottom Dump
• Capacity: CAPACITY OF 20 CUBIC YARDS / SINGLE HOPPER
• Capacity: CAPACITY OF 23 CUBIC YARDS TO THE TOP OF THE BANGBOARDS
• Length: 42'-0"
• Width: 96"
• Height: 10' WITH BANGBOARDS / 9' 1" WITHOUT BANGBOARDS
• Coupler Height: 48"

Tub Construction

• Fifth Wheel: OSCILLATING COUPLER WITH STANDARD KING PIN AND RUBBER BUSHINGS (SIMPLIFIED COUPLER ASSEMBLY)
• King Pin Location: 18" (STANDARD)
• Upper Hopper: UPPER HOPPER 10 & 12GA (STANDARD LIGHTWEIGHT) (2 VERTICAL SIDE SUPPORTS)
• Lower Hopper: LOWER HOPPER 10GA (STANDARD LIGHTWEIGHT) 54" X 108" OPENING - SIDES 12GA, ENDS 10GA
• Door Material: 3/16 80W (STANDARD DOORS)
• Gate Style: COMMERCIAL GRADE STEEL WITH SLIDE LOCKS
• Bang Boards: WOOD BANG BOARDS
• Pushblock: WELDED PUSH BLOCK WITH CERTIFIED UNDER RIDE (LIGHT WEIGHT PUSH BLOCK DESIGN WITH CUT OUT)
• Bottom Rail: 4" X 6" X 3/16" HSLA TUBE
• Top Rail: 4" X 6" X 3/16" HSLA TUBE
• Body Braces: (2 K BRACES FRONT AND REAR NEW DESIGN)(2 HOPPER SUPPORT CHANNELS FRONT AND REAR)

Tarping System

• Tarp Style: CPS, TARP FLIP ELECTRIC MESH BLACK 16' (FOR 40') ROLL RITE TM400 BOTTOM DUMP APPLICATION. MANAC # 984 1799

Lighting & Safety

• Main System: LED - ICC & DOT APPROVED SEALED BEAM LIGHTING SYSTEM
• Front Connector: 7 WAY (SAE J560) (ALUMINUM FRONT CONNECTION BOX, CONNECTED TO FRONT LOWER HEADER)
• Additional Front Connector: 6 WAY - WIRED FOR GATE CONTROL
• Mid-Flashers: SEALED BEAMS LED, ONE LAMP INCLUDING SIDE MARKER AND FLASHER EACH SIDE AT MIDDLE POINT, AMBER
• Reflective Tape: CONSPICUITY STRIPING IN COMPLIANCE WITH FMVSS/ CMVSS 108. GRAY AND RED EACH SIDE, FULLY COVERS REAR SILL AND PUSHBLOCK

Axles & Suspension

• Axle Qty: TRIDEM
• Axles: HUB PILOTED 25K AXLES: 1 ABS 2 NON ABS
• Suspension: TRIDEM AIR RIDE SUSPENSION
• Track: 71.5" (96" WIDTH)
• Brakes: 16 1/2" X 7" CAM BRAKES
• Bearings: HM 218248 AND HM 212049
• Slack Adjusters: TSE, S-ASA, AUTOMATIC, 28 SPLINES
• Seals: STEMCO, "GUARDIAN" TYPE, WITH "GEARLUBE" MINERAL OIL, SAE 80W90
• Brake Chambers: T.S.E. BRAKE, "OMNIBRAKE" (30-30)
• Air Valves (ABS): 2S/1M TRIDEM
• Air System: TWIN 8" BORE AIR CYLINDERS WITH 60 GALLON AIR RESERVOIR, FILTER, OILER AND QUICK RELEASE VALVE
• Gate Control: AIR CONTROLLED - ELECTRIC CONTROLLED FROM THE CAB OF TRUCK AND MANUAL FROM THE GROUND (VERSA VALVE HAND CONTROL)

Wheels & Tires

• Tire Size: CONTINENTAL 11 R 24.5 HSR-216PLY (43.5")
• Exterior Wheel: 11R24.5 16PLY W/STEEL WHEEL
• Interior Wheel: 11R24.5 16PLY W/STEEL WHEEL

Additional Features

• Landing Gear: DROP LEGS/STIFF LEG 4" X 4" SQUARE (GALVANIZED)
• Windrow Deflector: STANDARD DIRT DEFLECTOR (GALVANIZED)
• Fenders: ALUMINUM FRONT AND REAR FENDERS BOLTED FOR TRIDEM
• Finishing (Paint): SHOT BLASTED, ACID BASED WASH WITH RUST INHIBITIVE RINSE. ONE COAT OF EPOXY PRIMER AND ONE COAT POLYURETHANE TOP COAT. COLOR: WHITE