2026 DOEPKER TRAILER SALES LTD. RT28464

DOEPKER TRAILER SALES LTD. RT28464 – Lowboy, GVWR 100,900 LB, WHEELBASE 37FT 11IN

DOEPKER TRAILER SALES LTD. RT28464 Lowboy tandem sliding tilt with GVWR 100,900 LB and 37FT 11IN wheelbase.

Key Specs

• Manufacturer: DOEPKER TRAILER SALES LTD.
• Model: RT28464
• Category: Lowboy
• Body Type: TANDEM SLIDING TILT
• Axle Configuration: 40T TANDEM (RT)
• Shipping Weight (EST): 18,500 LB
• GVWR: 100,900 LB
• Wheelbase: 37FT 11IN
• Distributed Load: 40 TON OVER COMPLETE LOWER DECK
• Concentrated Load (Lower Deck): 28 TON OVER 15', 25 TON OVER 10'

Tub Construction

• Tail: KNIFE EDGE TAIL
• Loading Angle: 7 DEGREE
• Max Tilt Angle: 13 DEGREE BASED ON 8’6” WIDE MODEL, 60” SPREAD ON 245/70R17.5 TIRES
• Cross Members: ON 12” CENTERS
• Live Roll Locations: REAR OF GOOSENECK AND FRONT OF MAIN DECK
• Tail Chain Slots: LOCATED WITHIN TOP OF OUTER FLANGE (D/S AND C/S) ALONG LOWER AND UPPER DECK (18 PER SIDE LOWER DECK; 4 PER SIDE UPPER DECK)
• Chain Securement Lugs: 3 REAR ACROSS BACK OF LOWER DECK AND 2 ACROSS FRONT OF LOWER DECK
• Inner Pin Pockets: 4 PAIR OF 1 5/8” INNER PIN POCKETS LOCATED ON LOWER DECK ALONG OUTER RAIL

Hydraulics & Control

• Main Deck: TO BE HYDRAULIC TILT
• Wet Kit Ready: 30 GALLON RESERVOIR REQUIRED; 25 GALLON / MINUTE PUMP; 2500 PSI (3,000 PSI MAX CAPACITY)
• Hydraulic Roller Option: LIFT CAPACITY APPROX. 14,700LB PER ROLLER AT 2,500 PSI CYLINDER PRESSURE
• Cylinder: HEAVY DUTY 6” BORE X 3” ROD X LONG STROKE DESIGNED TO BE FULLY CLOSED WHEN TRAILER IN TRANSPORT POSITION
• Hydraulic Valve Bank: HANDLES WORK IN AN UP/DOWN MOTION LOCATED ON D/S LOWER GOOSENECK SECTION
• Hinge/Coupler: HINGE DOWN UPPER COUPLER PLATE OPERATED WITH AIR OPERATED LOCK PIN

Axles & Suspension

• Suspension: RIDEWELL RAR240 UNDERSLUNG; 25,000 LB AIR RIDE
• Axles: 25,000 LBS AXLES
• Chain Axle Slings: CHAIN AXLE SLINGS
• Brake Note: BRAKE SIZE VARIES BY RIM/TIRE AND WIDTH SELECTION: 17.5IN RIMS/TIRES MUST BE PAIRED WITH 12 1/4” DRUM OR PAN17 DISC BRAKES
• Sliding Suspension Frame: SPECIAL DESIGN TO ELIMINATE SIDE TO SIDE SUSPENSION MOVEMENT; UPGRADED TO SLIDE ON UHMW WEAR PADS

Wheels & Tires

• Tire Examples: 245/70R17.5
• Rim Size Note: 17.5IN RIMS/TIRES REQUIRE SPECIFIED BRAKE PAIRING
• Spread: 60” SPREAD ON 245/70R17.5 TIRES

Lighting & Safety

• Lighting: LED LIGHTS AS PER CMVSS
• Signals: SIDE SIGNAL LIGHTS; RED REAR SIGNAL
• Strobes: 2 OVAL AMBER STROBE LIGHTS FACING REAR C/W SWITCH IN AIR GAUGE BOX
• Reflective Tape: REFLECTIVE TAPE
• Certification: CANADA/U.S. SERIAL PLATE; SAFETY CERTIFIED
• Rear Impact Guard: MEETS CMVSS 223 SPECIFICATIONS

Paint & Finish

• Surface Prep: FULLY STEEL SHOT BLASTED
• Coating: PURE ZINC COATING APPLIED TO COMPLETE STEEL OUTSIDE
• Primer: ZINC RICHED PPG TX7 SERIES EPOXY PRIMER INSIDE AND OUT
• Topcoat: PPG TOPCOAT (ONE COLOR)
• Cure: ENTIRE TRAILER PLACED IN TEMPERATURE CONTROLLED HEATED OVEN TO CURE PAINT TO MEET DOEPKER SPECIFIC HARDNESS AND ADHESION CRITERIA

Protective Features

• Mud Flaps: MUD FLAP IN FRONT OF HYDRAULIC CONTROL VALVE; 1 PAIR OF MUD FLAPS BEHIND REAR WHEELS
• Secured Cable Tracking: SECURED CABLE DESIGNED TRACKING SYSTEM FOR AIR AND ELECTRICAL
• Cargo Securement: CARGO SECUREMENT OPTIONS AVAILABLE; NSC10/CMVSS905 COMPLIANT