2021 CPS UTAH BOTTOM DUMP TRAIN 3-4

Call For Quote!
In stock
SKU
2021 CPS UT TRAIN

Hello

Array ( [country] => PK )

2021 CPS UTAH BOTTOM DUMP TRAIN 3-4
(3-AXLE LEAD, 4-AXLE PUP)

SPECIFICATIONS

3-Axle Lead: Model 4B340A200

4-Axle Pup: Model 4B224A200

37 CU YD Capacity

64’ OAL

96” Wide

Hopper Height: 10’ with Bangboards

Est Weight: 29,200 LBS

 

FRAME, GATES, & HOPPER

Lead:

Oscillating Fifth Wheel with Standard King Pin

King Pin Location: 18" (Standard)

Pintle Hook: Pintle Hook Installed Under Push Block

Drop Legs/Stiff Leg 4" X 4" Square (Galvanized)

 

Pup:

Permanently Mounted Turntable with Tandem Axle Dolly

Adjustable Draw Bar, 8'-12'; 12' Increments

3" ID Pintle Eye

Dolly Jack

Aluminum Shed Plates at Front & Back

 

Both:

Upper Hopper: 10 & 12GA (Standard Lightweight)

Lower Hopper: 10GA (Standard Lightweight)

Sides 12GA, Ends 10GA

AR400 Steel Gates with Side Locks

12" Wood Bangboards

18" AR450 Steel Wings

Steel Front & Rear Fenders

Removeable Push Block

Bottom Rail: 4" X 6" X 3/16" HSLA Tube

Top Rail: 4" X 6" X 3/16" HSLA Tube

Tarp Brackets Installed for Cramaro Flip Tarp (Available Upon Request)

 

ELECTRICAL:

DOT Approved LED Lighting System

Front Connector: 7-Way (SAE J560)

Additional Front Connector: 6-Way Wired for Gate Control

Amber Mid-Flashers

Rear Connector: Rear 7-Way & 6-Way for Pintle Hook Installed at Rear Plate for Operation of Pup (Lead)

Rear 7-Way & 6-Way Connector for Operation of Pup (Lead)

 

UNDERCARRIAGE:

3-Axle Lead

4-Axle Pup (2 Front, 2 Rear)

Hub Piloted 25k Axles: 1ABS 1 Non-ABS

Spring Suspension

Track: 71.5" (96" Width)

Windrow Deflector: Standard Dirt Deflector (Galvanized)

Brakes: 16 1/2" X 7" Cam Brakes

Bearings: HM 218248 & HM 212049

Slack Adjusters: Meritor, Automatic, 28 Splines

Seals: Stemco, "Guardian" Type, With "Gearlube" Mineral Oil, SAE 80W90

Brake Chambers: T.S.E. Brake, "Omnibrake" (30-30)

Tire Size: 385/65R22.5-14.9 W X 41.9 DI

Outside Wheels: Aluminum

 

AIR SYSTEM:

Twin 8" Bore Air Cylinders with 60 Gallon Air Reservoir, Filter, Oiler & Quick Release Valve

Gate Control: Air Controlled: Electric Controlled from Cab of Truck & Manual from Ground. (Versa Valve Hand Control)

Air Valves (ABS)

Rear Gladhands for Pintle Hook (Service & Emergency with Shut-Offs) Relay Valve Installed on Tank & Quick Release on Emergency Line

 

PAINT & SAFETY:

Shot Blasted, Acid Based Wash with Rust Inhibitive Rinse.

One Coat Epoxy Primer & One Coat Polyurethane Topcoat.

Color: White

Reflective Tape Conspicuity Striping in Compliance With FMVSS/ CMVSS 108.

Gray and Red Each Side, Fully Covers Rear Sill and Push Block.

More Information
location Salt Lake City, Utah
Condition New
Model 4B340A200 / 4B224A200
Make CPS
Year 2021